Flat-rate pricing for plumbing, HVAC & electrical contractors — Stop guessing on price.

Flat-rate pricing and SOPs built for plumbing, HVAC & electrical contractors. Price every job right and run every job the same way — one flat payment, yours forever, for less than one month of field-service software.

  • Built for owner-operators
  • Instant download
  • One-time payment — no subscription
  • 30-day money-back guarantee
Illustration of a tradesperson holding a price list beside an orange service van

The full kit is $89 once. Jobber runs $99–$139 a month and Housecall Pro Essentials $149–$189 a month — and neither tells you what to charge.

The nightly math problem

Pricing from the truck seat is costing you money

The gut-feel quote

A number that "sounds about right" rarely covers your real labor burden, the truck, insurance, and the callback you'll eat in three weeks. Win the job, lose the margin.

The hourly trap

Time-and-materials billing pays you less the faster you get. Your best tech finishes in two hours, bills two hours, and the shop eats the drive time, the parts run, and the paperwork.

Every job run differently

No standard intake, no standard invoice, no standard follow-up. Quotes sit unsent, invoices go out late, and good reviews happen by luck instead of by process.

Free tool — no purchase needed

The Flat-Rate Pricing Calculator

Enter your own numbers. The calculator builds a flat-rate price the way profitable shops do: labor, materials, your overhead, and your profit margin — priced into the job, not hoped for at the end of the month. New to the method? Start with the flat-rate pricing guide for plumbers, then run your own numbers here — or on the dedicated calculator page, which walks through where each number comes from.

$

What one billable hour of your labor needs to earn — not just the wage.

Hands-on time on site, start to finish.

$

What the parts and materials cost you, before markup.

%

Truck, fuel, insurance, software, phones — as a share of job cost.

%

The slice of the final price that is actual profit. 15–25% is a common target for healthy shops.

Your flat-rate price for this job

$1,114

One number to quote the customer — no hourly clock, no surprise add-ons.

  • Labor$375
  • Materials$400
  • Overhead share$116
  • Your profit$223

Quote this job 10% cheaper to "win it" and the price drops to $1,003 — your profit falls from $223 to $112. A 10% discount just cut your profit in half.

The Kit — $89 one-time

Everything in the Flat-Rate Pricing + SOP Kit

Six tools that work together: price the job, present the price, track what the job actually made, and run the next one exactly the same way. The plumbing SOP template guide shows which procedures to standardize first.

  1. 01

    Flat-Rate Pricing Calculator

    The full version of the free tool above — enter your labor rate, overhead, and margin once, then price any job in under a minute. Save your shop's numbers and reuse them on every quote. Three tabs: how-to instructions, the calculator itself, and a fully worked example job.

  2. 02

    Price-Book Template

    A ready-to-fill price book for your most common jobs — water heaters, panel work, drain calls, changeouts, and more. You enter your own prices using the calculator; the structure, task descriptions, and customer-friendly wording are done for you. It ships with 11 worked example lines and 20 blank formula rows across plumbing, HVAC, electrical, and general work. See sample lines and grab the free starter sheet →

  3. 03

    Quote & Follow-Up Scripts

    Word-for-word scripts for presenting a flat-rate price, handling "that's more than I expected," and following up on quotes that went quiet — by phone, text, and email. Inside: a 5-step phone quote script, a written quote template, and three follow-up sequences — no-answer, quote-sent, and the post-job review ask.

  4. 04

    Job-Costing Spreadsheet

    Log estimated vs. actual hours and materials on every job. In two weeks you'll know exactly which jobs make money, which ones bleed, and which prices in your book need adjusting. Three sheets: a start-here guide, a 30-row job log that tracks 19 columns per job, and a summary dashboard that fills itself in.

  5. 05

    SOP Library

    Step-by-step standard operating procedures for the five moments that decide whether a shop feels professional: call intake, dispatch, invoicing, callbacks, and warranty work. Checklists your future hires can follow on day one. A 10-page PDF: all five procedures written out step by step, a printable checklist for each, the word-for-word intake script and field list, and a fill-in policy page for your shop.

  6. 06

    First-30-Days Implementation Checklist

    A week-by-week rollout plan sized for an owner who still runs calls: set your rates in week one, build your top-20 price book in week two, scripts in week three, job costing live in week four.

Illustration of the kit's price book, checklists, and calculator spread out on a workbench

A straight note on what this is: the kit is business templates and formulas. You enter your own labor rates and prices — the kit never prescribes what a plumber, HVAC tech, or electrician should charge. Your market, your costs, your numbers. And it's not legal advice; for contracts and licensing questions, your own attorney and licensing board are the right call.

Look inside

Inside the kit — the actual files

No mockups and no stock art: these are screenshots of the real spreadsheets and documents, taken straight from the files buyers download. What you see here is what you get.

Screenshot of the Flat-Rate Pricing Calculator spreadsheet's Example Job tab, pricing a 50-gallon water heater swap step by step to a flat-rate price of $1,057.50
Flat-Rate Pricing Calculator (XLSX) — the Example Job tab: a water-heater swap priced step by step, so you can watch the math before you trust it with your numbers.
Screenshot of the Price Book tab of the Price-Book Template spreadsheet, showing 11 worked example lines with labor hours, material costs, and calculated flat-rate prices
Price-Book Template (XLSX) — the Price Book tab with its 11 worked example lines. See 49 sample lines priced out →
Screenshot of the Job-Costing Tracker's Summary tab, the dashboard that totals quoted prices, actual costs, gross profit, and margin by trade from the Job Log
Job-Costing Tracker (XLSX) — the Summary tab. It fills itself in from the Job Log: quoted vs. actual, gross profit, and which trade is really paying.
Screenshot of page 2 of the SOP Library PDF: SOP 1, Customer Intake, with the full 11-step procedure written out
SOP Library (PDF, 10 pages) — SOP 1, Customer Intake, written out step by step. Five procedures, each with a printable checklist.
Screenshot of page 1 of the Quote and Follow-Up Scripts document, showing how the fill-in blanks work and the start of the phone quote script
Quote & Follow-Up Scripts (DOCX) — page 1: how the fill-in blanks work, then the 5-step phone quote script.
Screenshot of page 2 of the First-30-Days Implementation Checklist PDF, showing the Week 1 checkbox list for finding your real shop numbers
First-30-Days Implementation Checklist (PDF, 5 pages) — Week 1: find your real numbers. Every week is a checkbox list sized for an owner who still runs a truck.

Pricing

One payment. No subscription. Ever.

The kit plus the hiring pack, together in the bundle — $99 instead of the $118 they cost bought separately — because the second truck is where pricing discipline usually falls apart.

The Kit

Flat-Rate Pricing + SOP Kit, on its own.

$89 one-time

  • Pricing calculator — full spreadsheet, 3 tabs
  • Price-book template — 11 example lines + 20 blank rows
  • Quote & follow-up scripts — phone script, quote template, 3 follow-up sequences
  • Job-costing spreadsheet — 30-job log + automatic summary
  • SOP library — 5 procedures, 10-page PDF with checklists
  • 30-day implementation checklist

30-day money-back guarantee: full refund within 30 days — one email to support@getflatratekit.com, refunded via Gumroad.

Get the Kit — $89

Hiring Pack

Hiring & Onboarding Pack, on its own.

$29 one-time

  • Job-post templates (tech & apprentice)
  • Interview scorecard — phone screen + 1–5 scoring
  • First-week onboarding checklist — day by day
  • Apprentice training tracker — first 90 days
  • Subcontractor agreement template

30-day money-back guarantee: full refund within 30 days — one email to support@getflatratekit.com, refunded via Gumroad.

Get the Hiring Pack — $29

Spreadsheets + PDFs. Works in Excel and Google Sheets. Every purchase covered by the 30-day money-back guarantee.

The honest comparison

Kit vs. software vs. coaching

Jobber, Housecall Pro, and RepairShopr are good at scheduling and invoicing. Coaching programs are good if you have the budget and a free quarter. Neither is a pricing system you own outright.

Feature FlatRateKit Field-service software Business coaching programs
Cost $89 one-time ($99 with hiring pack) $99–$189/month, per user, forever — $1,188+ a year (Jobber Connect at the low end, Housecall Pro Essentials at the top) Multi-month programs, priced per engagement
Tells you what to charge Yes — calculator + price book built from your numbers No — it schedules and invoices the prices you invent Eventually, inside a months-long program
SOPs & scripts included Yes — intake, dispatch, invoicing, callbacks, warranty No Sometimes, aimed at larger shops
Time to use it Price your first job this afternoon Days of setup, onboarding, and data entry Weekly calls for months
If you stop paying Nothing happens — it's yours You lose access to your system Materials access usually ends
Built for Owner-operators and shops under 5 trucks Shops ready to run dispatch software daily Owners who can step off the tools

Plenty of shops end up with both: this kit to get pricing and process right, software later when call volume actually demands it. Get the numbers right first — software just multiplies whatever numbers you feed it.

Fit check

Who this is for — and who it isn't

Built for you if…

  • You run a plumbing, HVAC, or electrical shop with 1–5 trucks — and you're still the one quoting most jobs
  • You price from the truck seat, a materials multiplier, or whatever the shop across town charges
  • You want prices built from your costs — your labor rate, your overhead, your margin
  • You can give it a few evenings: set your rate, build your top-20 price book, put the SOPs by the phone
  • You'd rather own a system outright than rent one by the month

Not for you if…

  • You run 15+ techs on ServiceTitan or similar — you need dispatch software and an office staff, not templates
  • You want ready-made prices handed to you — the kit never prescribes what to charge; it builds prices from your numbers
  • Your work is mostly new-construction bidding — this is service and repair pricing, not plan takeoff
  • You want an app — the kit is spreadsheets and PDFs you own outright, not software you log into

Add-on — $29, or in the $99 bundle

Hiring & Onboarding Pack

Your first hire decides whether you bought yourself a business or a second job. These templates make the first hire — and the first week — repeatable instead of improvised.

  • Job-post templates

    Postings for journeyman techs and apprentices that sell the job honestly — pay structure, truck, hours, growth path — and screen out bad fits before they waste your Saturday.

  • Interview scorecard

    The same questions, scored the same way, for every candidate — technical skill, customer manner, reliability signals — so you hire on evidence, not on who interviewed well.

  • First-week onboarding checklist

    Paperwork, tools, ride-alongs, and your SOPs in the right order — so a new hire's first week runs the same whether you're on site or on vacation.

  • Apprentice training tracker

    A simple grid of skills and sign-offs, so you can see exactly what your apprentice can run alone, what needs a shadow, and what's next — no guessing at review time.

  • Subcontractor agreement template

    A plain-language starting template covering scope, payment terms, insurance, and warranty responsibility when you bring in help. Have your own attorney review it before use — it's a template, not legal advice.

Two ways to get it

$29 on its own

Or get it with the full Pricing + SOP Kit in the bundle:

$99 bundle, one-time

That's $19 less than the $118 the two cost bought separately.

Get the Bundle — $99 Hiring Pack only — $29

Instant download. 30-day money-back guarantee: full refund within 30 days — one email to support@getflatratekit.com, refunded via Gumroad.

Use it for 30 days. If it doesn't change how you price, don't pay for it.

Build your price book, run the job-costing sheet for a month, use the scripts on real quotes. If the kit hasn't paid for itself in clearer prices and cleaner process, email support@getflatratekit.com within 30 days of purchase for a full refund, refunded through Gumroad — no forms, no exit interview, no hard feelings.

Free guides

Pricing & process, explained straight

The same methods the kit is built on, written out in full. Read them free; use the calculator as you go.

Plumbing · Pricing

Flat rate pricing for plumbers: the 15-minute method

Your true hourly cost, your real billable hours, and a worked water-heater example — the whole method on one page.

Read the flat-rate pricing guide for plumbers →
HVAC · Pricing

How to price HVAC jobs without losing money

Seasonality, the billable-hour trap, and callback costs — plus a full changeout priced line by line.

Read the guide to pricing HVAC jobs →
Electrical · Pricing

How to price electrical jobs without guessing

Burdened labor, the drive-time problem, permit costs — plus a panel upgrade and an EV charger circuit priced line by line.

Read the guide to pricing electrical jobs →
All trades · Pricing

Flat rate vs time and materials: which makes money?

The same water heater priced both ways — where hourly billing quietly loses, where flat rate struggles, and the hybrid most shops run.

Read flat rate vs. time and materials →
All trades · Pricing

Why your quotes keep losing money (3 pricing mistakes)

Pricing off your wage, invisible overhead, and the discount that quietly halves your profit.

Read why your quotes keep losing money →
Plumbing · Operations

Plumbing SOP template: what to standardize first

Five procedures, one right order. Start with intake, and write SOPs a new hire can actually follow.

Read the plumbing SOP template guide →

Questions

Before you ask

Is this legal advice?

No. The kit is business templates and formulas — pricing calculators, spreadsheets, scripts, checklists, and procedure templates. Nothing in it is legal, tax, or licensing advice. Templates like the subcontractor agreement are starting points to have your own attorney review, and licensing questions belong with your state or local licensing board.

Do I need to be a licensed contractor to use it?

No license is required to buy or use the kit — but it's built for owners who already run a shop. It's a business-operations tool, not trade training: it won't teach you to braze, wire, or plumb, and it doesn't replace the licensing your jurisdiction requires to do the work itself.

What format is it in?

Spreadsheets and PDFs. The calculator, price book, and job-costing sheet are spreadsheets that work in both Microsoft Excel and Google Sheets; the scripts, SOPs, and checklists are clean PDFs you can print for the truck or the office wall. Instant download, no special software, no login, no subscription.

What's the refund policy?

30-day money-back guarantee. Use the kit for up to 30 days after purchase; if it's not working for your shop, email us for a full refund, refunded through Gumroad — the platform that processed your payment. One email, no forms, no retention script. Questions or a refund inside 30 days: email support@getflatratekit.com.

I run a one-person shop. Is this overkill?

A one-person shop is exactly who it's built for. When you're the tech, the dispatcher, and the bookkeeper, pricing by gut and running every job from memory costs you the most — and there's no office staff to catch it. The kit is sized to set up in a few evenings, and the SOPs matter even more later: they're what your first hire will run on.

Does the kit tell me what to charge?

No — and be wary of anything that does. Prices that work in Phoenix lose money in Portland. The kit gives you the formulas and the structure; you enter your own labor rate, overhead, and margin, and it builds prices from your real costs. The worked examples in the guides use round numbers to show the math, not to set your prices.

How is this different from Jobber or Housecall Pro?

Those are field-service software — scheduling, dispatch, invoicing — at $99–$189 a month. They're good tools, but they charge you monthly to invoice whatever prices you invent. FlatRateKit is the layer underneath: how to set the prices and run the process in the first place, for a one-time $89. Many shops use the kit first and add software later.

Why are there no reviews?

Because the kit is new — it launched in November 2026 — and we won't invent, borrow, or buy reviews to fill the space. Instead, you can look inside the actual files before you buy: the free starter sheet and the free SOP checklist on this site are real excerpts from the kit, and every purchase is covered by the 30-day money-back guarantee. When buyers leave reviews, they'll appear on the Gumroad product pages.

About

Why this kit exists

Ask a room of trade-shop owners how they set their prices and most answers sound the same: "what the guy across town charges," "time and materials plus a markup," or just a number that felt survivable. Meanwhile the tools meant to help split into two camps — software that bills you every month to manage prices you still have to invent, and coaching programs priced for shops with a general manager.

FlatRateKit was built for the gap: the owner-operator and the two-truck shop. It was assembled from public trade-business sources — published flat-rate methodology, contractor association guidance, and the pricing and operations practices experienced owners share openly — then stripped down to what a small shop can actually set up in a few evenings.

One principle runs through all of it: your prices have to come from your costs. That's why nothing in the kit prescribes a price for any job. You bring your labor rate, your overhead, and your margin; the kit brings the math, the structure, and the checklists. What you charge stays your call — it just stops being a guess.